6 Configure the Operation Modes
The
TxTriggerLevel
operates similar for the transmission. If the defined amount is received from
the network, the NetCom
+
does not accept more data to transmit. These options reduce latency
times, by increasing the network traffic.
6.2.2.2 Transfer Settings
Web: menu “SERIAL CONFIGURATION”, column “Port N”, “Transfer Settings”.
Telnet: “SerialPorts”, select “Port N”, “Transfer Settings”
The Transfer Settings allow different operation modes. They are selected by the basic
Mode
set-
ting. Depending on the current mode, only some of the many parameters are useful. The web
configuration hides those parameters without function.
SerialPorts
+---------------------+
|
Serial Settings
|
|
Transfer Settings
|
+---------------------+
Transfer Settings
Port Nr.
1
Mode
+---------------------------+
|
Driver Mode
|
|
Null Modem Tunnel
|
|
TCP Raw Server
|
|
TCP Raw Client
|
|
TCP Advanced Settings
|
|
UDP Mode
|
|
IP Modem
|
|
Print Server
|
|
Point to Point Protocol
|
+---------------------------+
Figure 75: Serial Port Mode Selection
The following paragraphs explain these operation modes as well as their parameters and configu-
ration in detail.
September 2016
NetCom Plus User Manual
76
Summary of Contents for NetCom Plus 111
Page 133: ......
