2 Introduction
Figure 7: NetCom Plus 811 / 813 / 813 POE Rear side
Figure 8: NetCom Plus 811 POE Rear side
The above models with eight serial ports look the same on the front side.
This side has the
connectors for Ethernet and the serial ports, plus the LEDs. Also here is a plastic cap hiding
the position for a WLAN antenna. The rear side holds the power connector, Reset button and
the configuration switches. Except for NetCom Plus 811 POE there is also the USB 2.0 expansion
port. The two holes for screws may be used as addtional contacts for Protective Earth.
2.3.2.13 NetCom Plus 811 DIO
Eight Serial Ports, 8 Digital Input and 8 Digital Output.
Power Requirement
DC 15V to 54V, 800 mA@15V
Power Connector
Terminal Block (
3.7.1
)
Power Alternative
Power over Ethernet PoE 802.3af Class 0
Serial Ports
8×RS 232
Serial Speed
180 bps up to 500 kbps
Data bits
7, 8
Digital Inputs
8× wet input (5V) optically isolated
Digital Outputs
8× relay output (contacts for normal
open / closed)
Dimensions
196×147×44 mm (W×D×H)
Weight
900 g
Table 14: Characteristics of NetCom Plus 811 DIO
September 2016
NetCom Plus User Manual
20
Summary of Contents for NetCom Plus 111
Page 133: ......
