Volvo 2016 XC60 Owner'S Manual Download Page 342

Page: 342 / 398

10 Maintenance and servicing

340

6. Reinsert the bulb holder into the headlight

housing and turn it clockwise.

7. Reinstall the headlight housing.

Related information

•

Bulbs – specifications (p. 342)

Bulbs – rear fog lights

The rear fog lights can be reached from

behind the bumper

1. Remove the bulb holder by turning it

counterclockwise.

2. Remove the burned out bulb by pressing

it in and turning it counterclockwise.

3. Insert a new bulb, press it downward and

turn it clockwise.

4. Reinsert the bulb holder and turn it clock-

wise.

Related information

•

Bulbs – specifications (p. 342)

Bulbs – location of taillight bulbs

The following illustrations show the location of

the bulbs in the taillight cluster.

Taillight lens, right side

Parking/side marker lights (LED)

Brake light

Backup light

Turn signal

Brake light (LED)

Related information

•

Bulbs – introduction (p. 335)

•

Bulbs – specifications (p. 342)

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands