||
10 Maintenance and servicing
10
334
Checking the level
The fluid reservoir is concealed under the
round cover at the rear of the engine com-
partment. The round cover must be removed
first before the reservoir cap can be
accessed.
The brake fluid should always be between the
MIN
and
MAX
marks on the inside of the res-
ervoir. Check, without removing the cap, that
there is sufficient fluid in the reservoir.
Fluid type
: DOT 4 boiling point >536 °F
(280 °C), P/N 9437433
Replace
: The fluid should be replaced
according to the intervals specified in the
Warranty and Service Records Information
booklet.
When driving under extremely hard condi-
tions (mountain driving, etc), it may be neces-
sary to replace the fluid more often. Consult a
trained and qualified Volvo service technician.
Always entrust brake fluid changing to a
trained and qualified Volvo service technician.
WARNING
•
If the fluid level is below the
MIN
mark
in the reservoir or if a brake-related
message is shown in the information
display:
DO NOT DRIVE
. Have the car
towed to a trained and qualified Volvo
service technician and have the brake
system inspected.
•
Dot 4 should never be mixed with any
other type of brake fluid.
Filling
1. Turn and open the cover.
2. Unscrew the reservoir cap and fill the
fluid. The level must be between the
MIN
and
MAX
marks.
Engine compartment – power steering
fluid
The fluid level must be between the
MIN
and
MAX
marks. For capacities and recom-
mended fluid grade, see Fuel tank volume –
specification and volume (p. 380).
Check the level frequently. It does not nor-
mally require changing.
WARNING
If a problem should occur in the power
steering system or if the vehicle has no
electrical current and must be towed, it is
still possible to steer the vehicle. However,
keep in mind that greater effort will be
required to turn the steering wheel.
Summary of Contents for 2016 XC60
