Volvo 2016 XC60 Owner'S Manual Download Page 231

Page: 231 / 398

07 Driver support

229

Lane Departure Warning (LDW) -

limitations

Limitations

The camera used by LDW has the same limi-

tations as the human eye. See The camera’s

limitations (p. 217) for more information about

the camera's limitations.

NOTE

No warning signal

will be given in the cer-

tain situations, such as:

•

If the turn signal is being used

•

The driver’s foot is on the brake pedal

•

The accelerator pedal is pressed
quickly

•

If the steering wheel is moved quickly

•

In sharp turns that cause the vehicle’s

body to sway

Related information

•

Driver Alert System (p. 222)

•

Lane Departure Warning (LDW) – symbols

and messages (p. 230)

•

Lane Departure Warning (LDW) – opera-

tion (p. 227)

•

Lane Departure Warning (LDW) – intro-

duction (p. 227)

When Increased sensitivity has been selected, a warning will be issued if a side marker line is crossed in this situation.

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands