Volvo 2016 XC60 Owner'S Manual Download Page 221

Page: 221 / 398

07 Driver support

Option/accessory, for more information, see Introduction.

219

Maintenance

Camera and radar sensor

In order to function properly, the camera and

radar sensor must be kept clean. Dirt, ice,

snow, etc., will reduce the function of these

components.
Remove ice and snow when necessary and

wash these areas regularly with a suitable car

washing liquid.

Related information

•

Collision warning – introduction (p. 209)

•

Collision warning* – function (p. 211)

•

Collision warning* – operation (p. 212)

•

Collision warning* – Pedestrian detection

(p. 214)

•

Collision warning* – Cyclist detection

(p. 213)

•

Collision warning* – limitations (p. 215)

•

The camera’s limitations (p. 217)

•

Collision warning – symbols and mes-

sages (p. 220)

The illustration is generic; details will vary, depending on the model

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands