Volvo 2016 XC60 Owner'S Manual Download Page 301

Page: 301 / 398

09 Wheels and tires

}}

299

Related information

•

Tire specifications (p. 299)

•

Tire inflation – pressure table (p. 301)

•

Tires – storage and age (p. 290)

•

Tires – tread wear indicator (p. 291)

Tire specifications

The following information can be found on a

tire's sidewall.

Tire ratings

Speed ratings

The speed ratings in the table translate as fol-

low:

Speed ratings

81 mph (130 km/h)

100 mph (160 km/h)

118 mph (190 km/h)

130 mph (210 km/h)

149 mph (240 km/h)

168 mph (270 km/h)

186 mph (300 km/h)

Information on the sidewall

Federal law mandates that tire manufacturers

place standardized information on the side-

wall of all tires (see the illustration).
The following information is listed on the tire

sidewall:
The tire designation:

NOTE

Please be aware that the following tire

designation is an

example only

and that

this particular tire may not be available on

your vehicle.

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands