Volvo 2016 XC60 Owner'S Manual Download Page 44

Page: 44 / 398

02 Safety

Whiplash Protection System (WHIPS)

The WHIPS system consists of specially

designed hinges and brackets on the front

seat backrests designed to help absorb some

of the energy generated in a collision from the

rear (when the vehicle is rear-ended).

In the event of a rear-end collision, the hinges

and brackets of the front seat backrests are

designed to change position slightly to allow

the backrest/head restraint to help support

the occupant's head before moving slightly

rearward. This movement helps absorb some

of the forces that could result in whiplash.

WARNING

•

The WHIPS system is designed to

supplement the other safety systems

in your vehicle. For this system to

function properly, the three-point seat

belt must be worn. Please be aware

that no system can prevent all possible

injuries that may occur in an accident.

•

The WHIPS system is designed to

function in certain collisions from the

rear, depending on the crash severity,

angle and speed.

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands