Volvo 2016 XC60 Owner'S Manual Download Page 323

Page: 323 / 398

09 Wheels and tires

Option/accessory, for more information, see Introduction.

321

Tire sealing system* – sealing

compound container

The sealing compound container must be

replaced if the tire sealing system has been

used to repair a tire or if the container’s expi-

ration date has passed (see the date on

decal).

Replacing the sealing compound
container

NOTE

•

After use, the sealing compound bot-

tle, the hose, and certain other system

components must be replaced. Please

consult your Volvo retailer for replace-

ment parts.

•

If the sealing compound bottle’s expi-

ration date has passed, please take it

to a Volvo retailer or a recycling station

that can properly dispose of harmful

substances.

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands