Volvo 2016 XC60 Owner'S Manual Download Page 203

Page: 203 / 398

07 Driver support

201

Distance Alert – symbols and

messages

Distance Alert is part of Adaptive Cruise Con-

trol and is a function that provides information

about the time interval to the vehicle ahead.

Symbols and text messages

A text message can be erased by pressing

briefly on the

button on the turn signal

lever.

Symbol Message

Description

Radar blocked See

manual

Distance Alert has been temporarily disconnected because the radar is obstructed in some way and can-

not detect other vehicles. See Adaptive Cruise Control – limitations (p. 193) for information on the radar

sensor’s limitations.

Collision warn. Serv-

ice required

Distance Alert or Collision Warning with Full Auto-brake and Pedestrian Detection is not functioning prop-

erly. Contact a trained and qualified Volvo service technician.

Related information

•

Distance Alert – introduction (p. 198)

•

Distance Alert – operation (p. 198)

•

Distance Alert – limitations (p. 199)

Summary of Contents for 2016 XC60














































































































































































































































































































































































































Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands

Volvo 2016 XC60, Owner'S Manual

Search results

Summary of Contents for 2016 XC60

Reviews:

Related manuals for 2016 XC60

Brands by name

Popular brands