VMware 4817V62 - vSphere - PC, Administration Manual

Page: 322 / 364

5 Extract the files to the provided directory.
The following System Preparation tools support directories were created during vCenter Server
installation:
C:\ <ALLUSERSPROFILE>\Application Data\Vmware\VMware VirtualCenter\sysprep
...\1.1\
...\2k\
...\xp\
...\svr2003\
...\xp-64\
...\svr2003-64\
where <ALLUSERSPROFILE> is usually
\Documents And Settings\All Users\
. This is where
vpxd.cfg
is
also located.
Select the subdirectory that corresponds to your operating system.
6 Click OK to expand the files.
After you have extracted the files from the
.cab
file, you should see:
...\ <guest>\deptool.chm
...\ <guest>\readme.txt
...\ <guest>\setupcl.exe
...\ <guest>\setupmgr.exe
...\ <guest>\setupmgx.dll
...\ <guest>\sysprep.exe
...\ <guest>\unattend.doc
where <guest> is 2k, xp, svr2003, xp-64, or svr2003-64.
What to do next
You are now ready to customize a new virtual machine with a supported Windows guest operating system
when you clone an existing virtual machine.
Install the Microsoft Sysprep Tools from the Windows Operating
System CD
You can install the Microsoft Sysprep tools from a CD.
Procedure
1 Insert the Windows operating system CD into the CD-ROM drive (often the D: drive).
2 Locate the
DEPLOY.CAB
file in the CD directory,
\Support\Tools
.
3 Open and expand the
DEPLOY.CAB
file, using a tool such as Winzip.exe or another tool capable of reading
Microsoft CAB files.
4 Extract the files to the directory appropriate to your Sysprep guest operating system.
The following Sysprep support directories were created during vCenter Server installation:
C:\
<ALLUSERSPROFILE>\Application Data\Vmware\VMware VirtualCenter\sysprep
...\1.1\
...\2k\
...\xp\
...\svr2003\
...\xp-64\
...\svr2003-64\
vSphere Basic System Administration
322 VMware, Inc.