VMware 4817V62 - vSphere - PC, Administration Manual

Page: 25 / 364

Starting and Stopping the vSphere
Components
2
You can start and stop each one of the major vSphere components, ESX/ESXi, and vCenter Server. You might
want to stop a component to perform maintenance or upgrade operations.
This chapter includes the following topics:
n
“Start an ESX/ESXi Host,” on page 25
n
“Reboot or Shut Down an ESX/ESXi Host,” on page 25
n
“Stop an ESX Host Manually,” on page 26
n
“Starting vCenter Server,” on page 26
n
“Start the vSphere Client and Log In,” on page 27
n
“Stop the vSphere Client and Log Out,” on page 28
n
“vSphere Web Access,” on page 28
n
“VMware Service Console,” on page 29
Start an ESX/ESXi Host
When you install ESX/ESXi, it starts itself through the installation reboot process. If your ESX/ESXi host is shut
down, you must manually restart it.
Procedure
u
On the physical box where ESX/ESXi is installed, press the power button until the power on sequence
begins.
The ESX/ESXi host starts, locates its virtual machines, and proceeds with its normal ESX/ESXi functions.
Reboot or Shut Down an ESX/ESXi Host
You can power off or restart (reboot) any ESX/ESXi host using the vSphere Client. You can also power off ESX
hosts from the service console. Powering off a managed host disconnects it from vCenter Server, but does not
remove it from the inventory.
Procedure
1 Shut down all virtual machines running on the ESX/ESXi host.
2 Select the ESX/ESXi host you want to shut down.
VMware, Inc. 25