manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 64 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 64

   64

Interfaccia Grafica Utente (GUI) per Speed Dome IP

IT

1 - Set time: Select date and choose the start and end time.

2 - Choose “Picture”—“SD Card”.
3 - Click " 

 " (Search) button to search the picture.

4 - Double click a filename or select a filename to view captured pictures.
5 - Clic 

 to return to the previous interface.

The descriptions of the icons are as follows.

Item

Button

Description

1

Close: Select certain picture and click this button to close this picture

2

Close all: Click this button to close all pictures viewing

3

Save: Click this button to select the save path of the picture file on the PC for saving 

the current picture

4

Save all: Click this button to select the save path of the figure files on PC for saving 

all pictures

5

Proper size: The picture will fit on screen by clicking this button

6

Actual size: Click this button to display the actual size of the picture as required

7

Zoom in: Click this button to amplify the picture

8

Zoom out: Click this button to zoom out the picture

9

Slide show photos: Click this button to play the picture in slide show mode

10

Stop show: Click this button to stop slide show

11

Play speed: Play speed of the slide show

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments