manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 20 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 20

   20

Graphic User Interface (GUI) for IP Speed Dome

EN

 

 

 

 

 

 

4.4.3 Grouping Setup

Go to Dome Function 

 Grouping Setup as below:

Go to “Edit Grouping” menu as shown below.

 

 

  

 

 

 

 

 

8 cruises can be set in a group. CRU 1 stands for Cruise 1, CRU 2 stands for Cruise 2 and so on. “Run Grouping” 

means to run the cruises in order.

4.4.4 Task Setup

Go to Dome Function 

 Task Setup menu as shown below:

 

 

  

 

 

 

 

 

By dividing 24 hours into several periods and appointing different commands for each period, the camera system will

automatically execute the commands according to the set time if there is no operation. Setting Steps:

1- Enable the task.

2- Set the task.

 

 

  

 

 

 

 

 

Time Format: Start Time – End Time. The tasks will be automatically executed in chronological order. Task Type: RSC, 

ASC, PRE, CRU, TRA.

Note:

 The home position function will be disabled if enabling task setting.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments