manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 28 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 28

   28

Graphic User Interface (GUI) for IP Speed Dome

EN

Brightness: 

set the brightness level of the camera's image.

Contrast:

 set the color difference between the brightest and darkest parts.

Hue: 

set the total color degree of the image.

Saturation:

 set the degree of color purity. The purer the color is, the brighter the image is.

Sharpness: 

set the resolution level of the image plane and the sharpness level of the image edge.

Noise Reduction:

 decrease the noise and make the image more thorough. Increasing the value will make the noise 

reduction effect better but it will reduce the image resolution.

Backlight Compensation: 

- Off: 

close the backlight compensation function. It is the default mode. 

- HWDR

 

As to the WDR scene, WDR will help the camera provide clear images when there are both very bright and very 

dark areas simultaneously in the field of the view by lowering the brightness of the highlight area and increasing 

the brightness of the lowlight area. High, middle and low can be selected. 

There will be some record lost in a few seconds during mode changing from non-WDR to WDR mode. 

- HLC:

 lower the brightness of the whole image by suppressing the brightness of the image's highlight area and 

reducing the size of the halo area. 

- BLC: 

if enabled, the auto exposure will activate according to the scene so that the object of the image in the 

darkest area will be seen clearly. 

Antiflicker: 

-

 Off: 

close the anti-flicker function. 

- 50Hz:

 make sure the horizontal stripes will not appear in the image while the device is adjusting the exposure 

automatically according to the brightness of the scene. 

- 60Hz: 

make sure the horizontal stripes will not appear in the image while the device is adjusting the exposure 

automatically according to the brightness of the scene. 

White Balance:

 adjust the color temperature according to the environment automatically. 

Frequency:

 50Hz and 60Hz can be optional. 

Day/night Mode: 

please choose the mode as needed.

Sensitivity:

 high, middle and low can be selected.

Infrared Mode: 

you may choose "ON", "OFF" and "Auto" as required.

Exposure Mode: 

you may choose "Auto" or "Manual" as required.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments