Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 45 / 70

45
Graphic User Interface (GUI) for IP Speed Dome
EN
Click “Modify” to change people information and click “Delete” to delete this face picture.
6. Set face comparison trigger options. Click “Comparison and Linkage” to go to the following interface.
Deduplication Period : In the set period, delete the repeated comparison results.
Similarity threshold : When the similarity of the captured face picture and the face picture added into the face database
exceeds the similarity threshold, alarms will be triggered.
Alarm List : Select an alarm list. For example, if “Stranger” is selected, the system will automatically search the matched
face picture from “Stranger” list/group when detecting a face and both face pictures will appear on the left in the face
comparison interface.
Alarm Trigger Mode : Face only mode. When the captured face picture is matched successfully, alarms will be triggered.
Alarm Output : if enabled, this will trigger alarm output when the captured face is matched successfully.
7. Set the schedule of the face detection and comparison. The setup steps of the schedule are the same as schedule
recording setup (See Schedule Recording).
8. Advanced configuration.
Application Scenes
: “Access control”, “security monitoring” or “customize” can be selected.
Snapshot Interval: If 5 seconds is selected, the camera will capture the same target once every 5 seconds during its
continuous tracking period.
Snapshot Number : If the snapshot number is enabled and set (eg. 3), the camera will capture the same target once every
5 seconds and it will capture this target 3 times at most during its continuous tracking period. If the snapshot number is
disabled, the camera will capture the same target once every 5 seconds until the target disappears in the detected area.