manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 52 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 52

   52

Graphic User Interface (GUI) for IP Speed Dome

EN

5.5.7 RTSP

Go to Config 

 Network 

 RTSP.

Select “Enable” to enable the RTSP function. 

Port

: Access port of the streaming media. The default number is 554. 

RTSP Address

: The RTSP address (unicast) format that can be used to play the stream in a media player. 

Multicast Address 

Main stream

: The address format is “rtsp://IP address: rtsp port/profile1?transportmode=mcast”. 

Sub stream

: The address format is “rtsp://IP address: rtsp port/profile2?transportmode=mcast”. 

Third stream

: The address format is “rtsp://IP address: rtsp port/profile3?transportmode=mcast”. 

Audio

: Having entered the main/sub stream in a VLC player, the video and audio will play automatically. 

If “Allow anonymous login…” is checked, there is no need to enter the username and password to view the video. 

If “auto start” is enabled, the multicast received data should be added into a VLC player to play the video.

Note:

1 - This camera support local play through a VLC player. Enter the RTSP address (unicast or multicast, eg. 

rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player to realize the simultaneous play with the 

web client. 

2 - The IP address mentioned above cannot be the address of IPv6. 

3 - Avoid the use of the same multicast address in the same local network. 

4 - When playing the video through the multicast streams in a VLC player, please pay attention to the mode of the 

VLC player. If it is set to TCP mode, the video cannot be played. 

5 - If the coding format of the video of the main stream is MJPEG, the video may be disordered at some resolutions.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments