manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 35 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 35

   35

Graphic User Interface (GUI) for IP Speed Dome

EN

5.4.3 Alarm Out

This function is only available for some models. Go to Config 

 Alarm 

 Alarm Out.

Alarm Out Mode

: Alarm linkage, manual operation, day/night switch linkage and timing are optional. 

Alarm Linkage

: Having selected this mode, select alarm out name, alarm holding time at the “Alarm Holding Time” 

pull down list box and alarm type. 

Manual Operation

: Having selected this mode, select the alarm type and click “Open” to trigger the alarm out imme-

diately; click “Close” to stop alarm.

Day/Night Switch Linkage

: Having selected this mode, select the alarm type and then choose to open or close 

alarm out when the camera switches to day mode or night mode.

Timing

: Select the alarm type. Then click “Add” and drag the mouse on the timeline to set the schedule of alarm out; 

click “Erase” and drag the mouse on the timeline to erase the set time schedule. After this schedule is saved, the 

alarm out will be triggered in the specified time.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments