manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 14 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 14

   14

Graphic User Interface (GUI) for IP Speed Dome

EN

4.2.1 Auto PT Flip

Select Auto PT Flip and then click 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 to set up the menu on the right; click 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 or 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 button to select On/Off. If “On” 

is selected, please click 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 button to return to the menu on the left and click 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 button to select Exit. Now, you will 

see the remote preview interface. (The ways to go to sub-menu, return or exit to the main menu in the following settings 

are similar to the above-mentioned steps. The following contents will not introduce it in details).
After you exit the main menu, press and hold 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 button to let the speed dome move to the bottom so that the dome 

will auto flip.

4.2.2 Date Setup

Go to System Setup 

 RS485 Setup as below:

 

 

  

 

 

 

 

1 - Set the date and time by clicking the direction button.

2 - Select STORE to save the setting.

4.2.3 Title Setup

Go to System Setup 

 Title Setup as below:

 

 

  

 

 

 

 

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments