manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 19 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 19

   19

Graphic User Interface (GUI) for IP Speed Dome

EN

 

 

 

 

 

 

 

 

4-  Press iris – to switch menu mode and PTZ mode. And then set the position of the preset by clicking the direction 

buttons.

5-  Set the title by clicking 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

or 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

  

  

 

 

 

 

 

 button.

6-  Save the setting.

4.4.2 Cruise Setup

Go to Dome Function 

 Cruise Setup menu as below:

 

 

 

 

 

 

In this interface, by programming presets in cruise list in advance, the system will keep calling those presets at the set 

time in sequence when executing cruise command so that non-stop monitoring between multiple important positions 

can be achieved. Setting steps are as follows:

1 -  Select the cruise number.

2 -  Edit the current cruise. This camera supports 8 cruises and 16 presets for each cruise. Go to “Edit Cur Cruise” menu 

as shown below:

 

 

 

 

 

 

Set the preset and time. The preset ranges from 001 to 255 and the dwell time is from 05s to 240s.

3 - Run the current cruise. The camera will automatically keep running according to the cruise you set until new com-

mand is received. The corresponding operating information will display on the screen when the camera is running.

4 - Select STORE to save the setting.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments