Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 16 / 70

16
Graphic User Interface (GUI) for IP Speed Dome
EN
4.3.1 Camera Control
After you select Camera Control, you will see the following menu.
(BLC) : When the background light is so stronger that the foreground is dark, the brightness of the whole image will
improve thereby enhancing the visibility of the foreground image if the BLC function is enabled.
(HLC):
If enabled, the darker part of image will be lightened, while the highlight part will be suppressed.
(3D-NR) : Reduce the noise of the brightness and chroma of the image in low illumination condition.
(Color Level) : Adjust the saturation of the image.
(Sharpness) : Set the image definition.
(WDR) : If WDR is ON, it will help the speed dome provide clear images even under back light circumstances. When
there are both very bright and very dark areas simultaneously in the field of view, WDR will balance the brightness level
of the whole image and provide clear images with details.
(Gamma) : Measurement of the contrast of an image.
(CAM Defog) : Improves image quality.
4.3.2 Image Setup
Select Image Setup to go to the following sub-menu.
- AE Setup
Go to AE Setup menu as shown below:
(AE MODE) : Auto, Bright, Shutter, IRIS and Manual are optional.
(Brightness) : Range from 0 (darkest)~20(brightness). It is available only when bright mode is selected.
(Shutter) : The lower the value of camera shutter is, the brighter the image is. It is available only when the shutter or
manual mode is selected.
(IRIS) : The higher the value of the camera IRIS is, the more the light gets. It is available only when the camera is IRIS
or Manual mode.