manualshive.com logo in svg

Vimar Elvox 46235.030D, Installation And Operation Manual, Page: 17 / 70

Share
Download
Vimar Elvox 46235.030D Installation And Operation Manual Download Page 17

   17

Graphic User Interface (GUI) for IP Speed Dome

EN

- WB Setup

Go to WB Setup menu as shown below:

 

 

(WB Mode):

 White Balance Mode. There are two options you can choose including auto and manual. You can select 

the mode according to different lighting condition. 

(MWB Red Gain)

:The operation is effective in manual mode. 

(MWB Blue Gain)

: The operation is effective in manual mode.

- AGC

The larger the number is, the higher the brightness and the more the noises of the image are.

- Image Flip

- MIRR: Turn over the image left or right.

- FLIP: Turn over the image up or down.

- ROTA: Turn over the image up, down, left or right.

4.3.3 Lens Setup

Go to Camera Setup 

 Lens Setup menu as shown below:

 

 

- Focus Limit

Set the nearest distance of focus.

- Zoom MAG DISP

If “ON” is selected, you will see the zoom magnification in the live image

- Zoom Speed

Adjust zoom speed. The range is from 1 to 8.

- DZoom

After enabling digital zoom mode, digital zoom will be increased on the basis of optical zoom. 

- Len Initialize

After enabling “Len Initialize”, the camera lens will restore to factory default.

Summary of Contents for Elvox 46235.030D







































































Reviews:

No comments