32
Example� If the set user code is the default and you want to set the number
333778899 in
position 1, send the following SMS:
1234.NUM1.333778899
Delete:
used to delete a telephone number saved to one of the 8 positions; the procedure does
not include a confirmation SMS from the GSM chronothermostat�
• Send an SMS message in the form of:
<user code>.NUM<n>.0
(zero)
where
<n>
is the position (from 1 to 8) where you want to delete the telephone number�
Example� If the set user code is the default and you want to delete the number in position
1, send the following SMS:
1234.NUM1.0
13.4 CONFIGURATION FOR REDIRECTING TO A PHONE NUMBER
The GSM chronothermostat can be configured so as to forward non-system SMS messages received
(for example information sent by the telephone carrier), to a specific telephone number� If this function
is enabled, all of the SMS that are received by the GSM chronothermostat and are not recognized as
command SMS messages (that is to say they do not begin with the correct user code) are forwarded
to the set specific telephone number�
To enable this function (called redirecting), send an SMS in the form of:
<user code>.RED.NUM<n>
where
<n>
is the position (from 1 to 8) of the telephone number to which you want
to redirect the
messages�
The GSM chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
SMS redirection
on number of
index <n>
where
index
identifies the position�
Example� If the set user code is the default 1234 and you want to forward all the non-system SMS
messages from the chronothermostat to the telephone number located in position 1, the SMS message
to send will be the following:
1234.RED.NUM1
