3
- After selecting
“Timed Manual”
mode
it is possible to change the set temperature value with button
; this change
will be confirmed automatically after approximately 5 seconds�
After setting the chronothermostat in
“Timed Manual”
mode, it is possible to change the duration with button
and then press
to confirm�
• Setting the chronothermostat on automatic operation
- Repeatedly press button
until the display shows the
Auto
symbol above the blinking graphic segments that
indicate the daily program schedule�
- Press button
to confirm�
In this case it is possible to temporarily go into manual operation, for example if the desired temperature is different
to the programmed temperature, setting the desired value with button
and waiting approx� 5 seconds for the
operation to be confirmed�
The new setting will stay active until the next change in the programmed temperature level, after which the stored
program will be restored�
• Switching off the chronothermostat
- Repeatedly press button
until the display shows OFF and, alongside the temperature value, the
OFF
symbol
blinking
- Press button
to confirm�
To switch the chronothermostat back on in one of the available operating modes, repeatedly press button
until the desired one is displayed; finally press button
to confirm�
• Timed switching off the chronothermostat
- Repeatedly press button
the OFF button and, alongside the temperature value, the
OFF
symbol blinking
- Press button
; the display will show two blinking digits indicating the number of hours (h) to set�
- Use button
to select the desired number of hours (from 1 to 99) then press button
to confirm�
• Setting the chronothermostat on antifreeze operation
- Repeatedly press button
until the display shows
Anti
and, alongside the set antifreeze temperature value,
the
*
symbol blinking
- Press button
to confirm�
