64
To delete customizing the chronothermostat SMS label, send the following message:
<user code>.C1.STR.O
where
0
is the number zero�
Note
: No response SMS message is required from the chronothermostat 01913�
Example�
If the set user code is the default 1234 and you want to delete the customization text associated with
the chronothermostat, send the following SMS message:
1234.C1.STR.0
13.8.2 Setting the automatic operation temperature levels
This function is used to set the temperature levels T1, T2, T3 that the chronothermostat uses in the
automatic operation mode�
To set the temperature levels, send the following SMS messages:
<user code>.C1.T1.XX,X
to set T1
<user code>.C1.T2.XX,X
to set T2
<user code>.C1.T3.XX,X
to set T3
where
XX,X
represents the temperature to set (at most two whole numbers and one decimal)�
The chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
Temp T<n> C1:
XX,X degrees
where
<n>
can take on the values 1, 2 or 3�
Example�
If the set user code is the default 1234 and you want to set the temperature level T2 of the
chronothermostat to 21�5°C, send the following SMS message:
1234.C1.T2.21,5
The chronothermostat 01913 will send the following SMS response message:
GSM-01913 1/1
Temp T2 C1:
21.5 degrees
