2
MAIN OPERATIONS FOR THE USER
The purpose of this section is to provide the user with guidelines on the current operations carried out on the GSM
chronothermostat 01913�
• Setting date and time
- Press button ; the display will only show the arrow
at the top to indicate the day and time to set�
- Use button
to move the arrow onto the current day�
- Press button
to confirm and then move on to setting the time; the two digits indicating the hour start blinking�
- Use button to set the current hour�
- Press button
to confirm and move on to setting the minutes; the two digits indicating the minutes start blinking�
- Use button
to set the current minutes�
- Press button
to confirm and exit; now the date and time have been set�
• Setting the chronothermostat on manual operation
- Repeatedly press button
until the display shows the symbol
MAn
alongside the blinking value of the temperature�
- Use button
to select the desired temperature value then press button
to confirm or button
to cancel
the operation�
- After selecting
“Manual”
mode
it is possible to change the set temperature value with button
; this change will be
confirmed automatically after approximately 5 seconds�
Note:
From any operating mode it is possible to move onto manual operation
by pressing button
�
• Setting the chronothermostat on timed manual operation
- Repeatedly press button
until the display shows the symbol
MAn
alongside the blinking value of the temperature�
- Press button
; the display will show two blinking digits indicating the number of hours (h) to set�
- Use button
to select the desired number of hours (from 1 to 99) then press button
to confirm�
- Use button
to select the desired temperature value then press button
to confirm or button
to cancel
the operation�
