67
13.8.7 Antifreeze setting
This function is used to set the Antifreeze chronothermostat operating mode�
To set this value, send the following SMS message:
<user code>.C1.ANTIGELO.XX,X
where
XX,X
represents the temperature to set (at most two whole numbers and one decimal)�
The chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
C1 ANTIFREEZE
XX,X degrees
Example�
If the set user code is the default 1234 and you want to set the Antifreeze chronothermostat operating
mode at a temperature of 8°C, send the following SMS message:
1234.C1.ANTIGELO.8
The chronothermostat 01913 will send the following SMS response message:
GSM-01913 1/1
C1 ANTIFREEZE
8 degrees
13.8.8 Setting timed switch-off
This function is used to set chronothermostat timed switch-off�
To set this mode, send the following SMS message:
<user code>.C1.OFFTEMP.XX
where
XX
represents the number of hours (from 1 to 99) in which the chronothermostat must remain
switched off�
The chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
C1 TIMED SWITCH-OFF, XX hours
Example�
If the set user code is the default 1234 and you want to set the Timed Switch-Off operating mode for
a period of 22 hours of the chronothermostat, send the following SMS message:
1234.C1.OFFTEMP.22
The chronothermostat 01913 will send the following SMS response message:
GSM-01913 1/1
C1 TIMED SWITCH-OFF, 22 hours
