69
The chronothermostat 01913 will send the following SMS response message:
GSM-01913 1/1
C1
Meas Temp:18.9 degrees
Set Temp:20 degrees
Mode:MAN
13.9 CHRONOTHERMOSTAT FIRMWARE VERSION REQUEST
This function is used to view the firmware version of the GSM chronothermostat 01913�
The SMS message to send is the following one:
<user code>.INFO
The chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
VERSION:<firmware version>
13.10 CHRONOTHERMOSTAT CONTROL VIA GSM MENUS
Some configuration, information request and test functions of the chronothermostat can be activated
via a menu that is accessed by simultaneously pressing the
and
buttons for a few
seconds�
After entering the GSM menu of the chronothermostat 01913, it is possible to scroll through the
list of available items with button
, and buttons
and
to confirm and cancel the choice
respectively�
Each of the menu items is identified with a pair of abbreviations that are displayed alternately on the
portion of display used for viewing the time (top left)�
13.10.1 Viewing the coverage of the GSM signal
For all the details see par� 12�3 on page 26 of this manual�
13.10.2 Resetting the configuration data of the GSM part of the chronothermostat 01913
For all the details see par� 12�4 on page 27 of this manual�
13.10.3 Viewing the state of the input of the chronothermostat 01913
This is a test function that is used to verify the state of the input; to view this, proceed as follows:
- enter the GSM menu (see the beginning of this paragraph);
- using button select the item
GSM COnF
and press
;
- using button
select the item
In StAt
and press
�
