39
5790 733 - 07
Vitocrossal 300 CA3 Series 2.5 to 6.0 Installation/Service
Vitocom 100, LAN 1 Requirements
User account on the Vitodata server
Operating a Vitocom 100 and using the Vitotrol app
require a valid user account on the Vitodata server.
Registration is possible either using the Vitodata 100
user interface or the Vitotrol app (see page 45).
Control device for the Vitotrol app
Recommended mobile end device (for operating system,
see App Store or Play Store):
H
iPhone iOS Version7 or higher
H
iPad2 or higher
H
iPod Touch with retina display
H
Terminal devices using Android Version 4 or higher
Control device for the Vitodata 100 user interface
Computer equipped with the following:
H
Functionality tested with web browser
-
Microsoft Internet Explorer, Version 8, 9, 10 and 11
- Firefox, Version 35
- For mobile terminal devices: Safari
H
‘Active’ internet connection
Message designations
H
Terminal device for receiving mail, e.g. computer
H
Mobile phone for receiving SMS (only with internet
service “Vitodata 100 fault management”).
H
Fax for receiving messages (only with internet service
“Vitodata 100 fault management”).
IP network
DSL router with a free LAN connection (on site).
H
Internet connection with “flat rate” (flat rate tariff
independent of time and data volume) with high level
of availability, i.e. the Vitocom 100 is permanently
connected with the Vitodata server.
H
Have dynamic IP addressing (DHCP) in the network
(LAN) checked on site, and if required set up, by an IT
expert prior to commissioning.
H
Determine the routing and safety parameters in the
IP network (LAN) so that port 80 and port 443 are
approved for direct outgoing connections. Prior to
commissioning have this checked on site by an IT
expert and, if necessary, set up.
Note:
During operation, the Vitocom 100 establishes a
secure internet connection to the Vitodata server.
The Vitocom 100 cannot be connected to any other
servers.
Installation
