42
5790 733 - 07
Vitocrossal 300 CA3 Series 2.5 to 6.0 Installation/Service
Vitocom 100, LAN 1 Internal Overview
Legend
!
Plug-in power supply unit connection, 5 V–, in, external –, minimum 0.6A (preinstalled)
§
Not Used
$
RJ 45 connector for LAN connection cable to DSL router
)
LON terminator, is enabled in the factory set condition (position of switch left, do not adjust)
aÖ
RJ 45 connector for LON connection cable (red) to the Vitotronic control unit (preinstalled)
A
Rating plate
"T1"
Maintenance button
"T2"
No function
"T3"
LON key, only when integrating the Vitocom 100
into a BMS (send service PIN).
"T4"
Reset button
"1"
LON service indicator (green LED)
"2"
No function
"3"
IP connection status (green and yellow LED)
"4"
Operating status display (green and red LED)
"5"
Display for data transfer service interface (green LED)
Connecting to the Network (LAN)
1. Plug LAN connecting cable into LAN connection
$
of the Vitocom 100.
2. Plug the free end of the LAN connecting cable into
a LAN connection on the DSL router or at the on-site
network installation.
DSL router documentation (on site)
Without cover
Installation
