41
5790 733 - 07
Vitocrossal 300 CA3 Series 2.5 to 6.0 Installation/Service
Forwarding messages
Pending messages in the heating system, e.g. sensor or
burner faults, are transferred via LON to the Vitocom 100.
The Vitocom 100 transmits these messages to the Vitodata
server. The messages can be displayed on the Vitodata 100
user interface. If recipients (email, fax or SMS) are stored on
the Vitodata server, the messages are automatically
forwarded to these recipients.
Note:
The Vitodata fault management internet service is
required for forwarding messages by fax or SMS
(Vitocom 100 standard delivery, free of charge for
3
years).
Content of messages
H
Date and time
H
System description
H
Message text
H
Fault code
H
System status
Operation with Vitodata 100 User Interface
For remote monitoring and control of Viessmann heating
systems with Vitotronic control units via IP networks.
Functions
Vitodata 100 control functions
H
Setting set temperature values, heating curve slope and
shift.
H
Setting operating programs, holiday programs and
switching times.
H
Setting party or economy mode.
H
Scanning operating conditions and temperatures
Legend
A
Vitocrossal 300 CA3 with integrated Vitocom 100
B
IP network (on site)
C
DSL router (on site)
D
Secure internet connection to the Vitodata server
E
Vitodata server, registration and log-in via www.
vitodata100.viessmann.com
F
Computer:
H
Remote control of the heating system via the
Vitodata 100 user interface
H
Receipt of messages via email
G
Fax for receiving messages (only with internet service
“Vitodata 100 fault management”)
H
Mobile phone for receiving messages via SMS (only
with internet service “Vitodata 100 fault management”)
Checking Network Settings
Have the following settings on the DSL router checked,
and if necessary adjusted, by an IT expert:
H
Dynamic IP addressing (DHCP) must e enabled.
H
Port 80 and port 443 must be approved for outgoing
connections.
Installation
