VideoRay Defender MSS, Operator'S Manual, Page: 46 / 109

Switch left
ROV
Power
Switch User Control
Console top central
left Turns the ROV power on and off. Twist in the direction of the arrows to
turn on the ROV power and press the switch to turn it off.
LIM
Module User Control
Console top central
right Test and Reset buttons can be found on the LIM.
The User Control Console top includes the following connections:
CONNECTION LOCATION FUNCTION
Power (100-240 Volts AC, 50, 60
Hz) IEC male Used to connect the User Control Console to a power
source.
The User Control Console side includes the following connections:
CONNECTION TYPE FUNCTION
Tether Whip
(
Specifications )
8 pin round
female Used to connect the User Control Console to the tether for power,
communications, video and accessory support.
Monitor Power Provides 12 Volts DC. Used to provide power to the monitor.
Monitor Signal Display Port
Female Used to provide the video signal to the monitor.
USB Ports (3) Type A
female Can be used to connect USB devices to the computer via the User
Control Console.
Ethernet RJ-45
female Can be used to connect the User Control Console to the computer for
Ethernet based ROV accessories.
The Display Port cable uses a locking locking connector. Make sure to press the release button when
disconnecting the cable to avoid damaging the connector.
Computer
The computer provides the hardware and operating system platform for VideoRay ROV control
software and image and video editing and production. The computer is embedded in the User Control
Console.