manualshive.com logo in svg

VideoRay Defender MSS, Operator'S Manual

Unlock the full potential of your VideoRay Defender MSS with the Operator's Manual. Download the comprehensive manual for free from manualshive.com to learn how to operate and maintain your underwater remotely operated vehicle. Stay informed and get the most out of your investment with this essential guide.

Share
Download
background image

The LIM has additional features that are described in more detail in the 

LIM Module Manual

.

ROV Power Safety Interlock

The ROV Power Safety Interlock prevents the ROV power from being engaged unless an ROV is
plugged into the tether. This feature protects users from accidentally contacting the ROV power circuit
of an open tether connector.

See the User Control Console Switches and Connections section for more information about these
components and their locations, and see the 

Pre-Dive Preparations

 section of the 

Quick Start

Instructions

 for information about testing these components.

Switches and Connections

The User Control Console top includes the following switches:

SWITCH

LOCATION

FUNCTION

Main
Power

User Control
Console top upper

Turns the User Control Console on and off.

Summary of Contents for Defender MSS














































































































Reviews:

No comments

Related manuals for Defender MSS

Brands by name

Popular brands

Load more brands