VideoRay Defender MSS, Operator'S Manual, Page: 43 / 109

MSS Defender
Operator's Manual, 1.00.00
User Control Console
The User Control Console provides power, communications and a video interface between the surface
and the ROV through the tether. The computer, which runs software to control the ROV, is housed in
the User Control Console along with a display monitor .
User Control Console Power Specifications
The VideoRay MSS operates on typical residential power in the range of 100-240 Volts AC, 50,60 Hz.
This can be provided from the land-based grid, a generator, or a battery with an inverter (optional). The
typical power requirements for operating from a generator or inverter are 3,000 Watts continuous
minimum.
The system includes a GFCI (Ground Fault Circuit Interrupter) / Circuit Breaker to protect the operator.
The power in the tether is 400 Volts DC. This circuit is protected by a LIM (Line Insulation Monitor).
The procedures for testing the circuit safety components can be found in the Pre-Dive Preparations
section of the Quick Start Instructions .
Do not block the User Control Console fans. Blocking the fans can lead to overheating
and component failure.
Display Monitor Tilt Arm