I N S T A L L A T I O N D A T A S H E E T - P R O G R A M M I N G
New functionalities
Display of the keypad
Actions and commentaries
DEVICE
LOCATING
(Select the device to test)
REQUEST IS SENT:
WAITING ANSWER
RF TEST
056
To return to the inactive state menu state,
press 5 seconds
on the key
Use the direction arrows to show the list of devices.
To stop the test.
2.2 Verification of the RF radio range of a device on an existing installation
With direction arrows, go to the menu :
MAINTENANCE
->
LOCATE A DEVICE
, select the device for which you wish to
verify the radio range and press on the [YES] key.
A regular flashing indicates sufficient radio range and displays the
value on the keypad. The latter must be at least equal to 20.
3 - Area 24/24
The 24/24 area helps different applications, mainly the possibility
to manage technical defaults,bt connecting the relays to the wire
entrance of the CT201/CT211 contact and by parametering the
aformentioned contact in the 24/24 contact, it will also help to
manage sector power cut. One can imagine other applicationsas
in panic bouton (champignon type), which during a press opens
the entry wire of the CT201/CT211 contact, thus helping inform
the monitor station PC of an assistance request. And even to
manage a smoke detector etc.
All the parametered devices in 24/24 area, can independently
have one of the other, one of thje 4 triggering types (siren, without
sirem : only the keypad that beeps, temporized or silent siren).
3.1 Functioning principle
Every device records first of all in a geographical area as usual:
Areas 1, 2, 3 or 4.
Then after installation you will have to go to the menu :
CONFIGURATION
->
AREAS AND DEVICES
->
DEVICES
->
DEVICE CONFIGURATION
Select the device with direction arrows then validate with the
[YES] key.
BE CAREFUL
:
After having validated with the [YES] key, the system proposes
the deletion of the device (do not press on the [YES] key to avoid
deleting the device), but use the direction arrows to go to the menu.
