Functioning of indicators
The complete functioning of the indicators is only possible with
the aid of VISIO v5.2 / V6000 V31.02 or superior panels.
At the arming
The arming stops.
The two indicators flashes green
for 5s then goes off : A fault was
detected.
Verify the keypad in order to
know more of what happened.
Without action from the user,
arming will start again after 3
min and the concerned detector
by detection will be excluded
from arming.
Flashing of the top red
indicator (only) every second
during temporisation.
Then the top red indicator
flashes every two seconds
indicating that the system is
well armed.
Everything is fine :
Incomplete arming
Problem was
identified during
the incomplete
arming (detection in
immediate area)
Display of the
information for 5
seconds
At the disarming
The indicators goes off, the system is stopped.
There was no alarm
An alarm triggered
on
The top indicator
flashes green for
2s, and that of the
bottom flashes
fixed green light
and the reader
beeps 4 times
The two
indicators
remain on with
fixed green light
for 5 seconds
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
In the reading of the badge, the reader emits a beep, then two
beeps indicating the good consideration of the order. Then the
indicators of the reader are going to indicate a message:
EMEA SALES
2, rue Alexis de Tocqueville
92160 ANTONY
FRANCE
Hot line : +33 (0)820 846 620 / UK : 0871 951
Fax : +33 (0)3 90 20 66 36
© 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIED
TM
is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
Specifications subject to change without notice.
North American Headquarter
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Hot line : 877-206-5800
Fax : 651-762-4693
www.videofied.com
I N S T A L L A T I O N D A T A S H E E T
Proximity Reader
BR
BR means BR650 for USA/Canada, BR750 for Australia/Singapore and
BR250 for Europe and rest of the world.
