3
Display of the keypad
3. Installation and programming
Actions and commentaries
KEYPAD 1
RECORDED
RADIO RANGE
TEST ?
REQUEST IS SENT :
WAITTING ANSWER
TEST IN PROGRESS
END = YES
RADIO RANGE
TEST ?
ENTER THE
INSTALLER CODE
(or
if there is a vocal mode).
4 TO 6 DIGITS
THEN YES
INSTALLER CODE :
CODE NAME :
ADJUSTING
TIME AND DATE
DATE (Year) :
00/ /
CONNECTED TO
MONITOR STATION?
FORMAT :
(Format)
Do the same for the
Month
, the
Day
, the
Time
and the
Minutes
.
Wait
Use direction arrows
right
or
left
to increase the
numbers and the [YES] key to validate the value and move to the next.
Naming the code +
(Becareful, some NAMES correspond to pre-
programming of key accounts. (In case of incorrect setting, please contact
your technical department).
Installer code +
then confirm : Code +
Wait
Wait
Wait
With the arrows
select the
desired protocol
then
validate with the [YES] key.
Verify the range : A regular flashing or a
value of 2/5 or better indicates a sufficient
RF radio.
In order to stop the test.
