Keypad Programming
3. Installation and programming
The choice of the protocol must be carried out according to the characteristics of the monitoring station PC.
It
determines the protocol that has to be selected.
In general, in France with interphones, the protocole to be used could be:
SURTEC
or
( VIDEO in case of presence of cameras)
otherwise :
CONTACT ID
or
(CONTACT ID + VIDEO in case of presence of cameras)
(North America only use Frontel)
Never select protocoles
FRONTEL
or
CONTACT ID + FRONTEL
which are used for tests.
Display of the keypad
Actions and commentaries
PHONE PREFIX :
ACCOUNT NUMBER:
TEL TELESURV 1 :
FRONTEL NBR 1:
PERIODIC TEST :
24 HOURS
TEST HOUR:
00
Enter prefix if
, otherwise
* compose without tone. # does a 2 second break.
CODE/STATE
MODIFICATION ?
BY-PASS
ENABLE ?
ENTER
YOUR I.D. :
PANEL PHONE NB :
Enter phone
(The client's, informative and optional data only.
This is the number spelled in vocal mode by the panel).
Wait
(For the individual, for the professional behind a fax and
if the line
serves as switchboard, e.g. barber shop).
Remark : the activation of the BY-PASS helps the remote arming of the
system, as well as remote maintenance connection.
or
(to modify the transmission state of events, turn to pages
8 and 9).
to increase hours +
, and do the same for minutes.
to change the
If the VIDEO or CONTACT ID+VIDEO protocols have been
chosen then N° of telephone of the receptor VIDEO (FRONTEL) of the
monitoring s
. do the same for the PHONE NUMBER 2).
Then enter IP addresses : IP1 :
10.0.0.16
and IP2 :
10.0.0.16
by typing : (
10+YES
) + (
0+YES
) + (
0+YES
) + (
16+YES
)
Enter the N° of telephone of he receptor SURTEC (or CONTACT ID) of he
monitoring s
(do the same for the TEL TELESURV 2).
Enter the Transmetter code +
, do not forget to add zeros in front if
need be
(8 digits are necessary in SURTEC).
