I N S T A L L A T I O N D A T A S H E E T - P R O G R A M M I N G
Parameters GPRS -
PREVIOUS
V32 Panel
Display of the keypad
Actions and commentaries
CONNECTED WITH
MONITOR STATION?
TELE PROTOCOLE :
FRONTEL
PHONE PREFIX :
ACCOUNT NUMBER:
PHONE NUMBER 1 :
(Enter 0)
TEST (hour) :
00
to increase the time + , and do the same
for minutes.
With the arrows
FRONTEL
if in mode GPRS alone, then
validate with the [YES] key, if not, if interphone in RTC + GPRS back up,
select
VIDEO
, validate with [YES] key.
Enter Monitoring code (connected) specified by the monitoring s
(4 minimum numbers).
MODIF. STATE / CODE
MONITORING?
or
(to modifiy the alamcodes or putting out of service).
ACTIVATE THE
BY-PASS?
Enter 0 +
(Do same for PHONE NUMBER 2, enter 0)
[because
GPRS connection].
IP address for a RTC/PSTN connection.
Enter the IP address :
10.0.0.16
by entering : (
10+YES
) + (
0+YES
) +
(
0+YES
) + (
16+YES
) (Do the same for IP FRONTEL 2).
This function is useful only in cas of RTC/PSTN connection. (
For the individual, for the professional behind a fax and
if the line
acts as a swithboard, e.g. barber shop).
2. Programming
TELE PROTOCOLE :
VIDEO
PHONE PREFIX :
Enter prefix if needed + , otherwise
(* compose without
tone. # does a 2 seconds break).
TEL FRONTEL 1 :
N° Tel of the FRONTEL server in connection RTC/PSTN. Enter 0 +
(do the same for FRONTEL 2, enter 0) [because GPRS connection].
TEST PERIOD:
24 HOURS
to change the
N° Tel of the FRONTEL server in connection RTC/PSTN. Enter 0 +
(do the same for FRONTEL 2, enter 0) [because GPRS connection].
IP address for a RTC/PSTN connection.
Enter the IP address :
10.0.0.16
by entering : (
10+YES
) + (
0+YES
) +
(
0+YES
) + (
16+YES
) (Do the same for IP FRONTEL 2).
FRONTEL IP 1 :
PHONE NUMBER 1
FRONTEL IP 1 :
