I N S T A L L A T I O N D A T A S H E E T - P R O G R A M M I N G
Parameters GPRS -
PREVIOUS
V32 Panel
Display of the keypad
Actions and commentaries
IP ADDRESS 1
0.0.0.0
in order to modify the value of the field.
to go to the next menu.
5
www.videofied.com
Enter the IP address of the monitoring station (FRONTEL receptor).
Remark : the point can be obtained with the [YES] key
Example for IP address 80.14.127.39 : Enter (
80+YES
) + (
14+YES
) + (
127
) +
(
39+YES
).
PASSWORD
IP ADDRESS 1
IP ADDRESS 1
xxx.xxx.xxx.xxx
to go to the next menu.
PORT 1
888
DOMAIN NAME 1
If you want to give a Domain Name
.
Be careful : Be careful if the
Domain Name and the IP are given, the panel will always use the Domain
Name.
Otherwise press on
Enter the Domain Name. Special caracters ., -, etc... are accessible with 1
and 0 keys.
to go to the next menu.
IP ADDRESS 2
0.0.0.0
in order to modify the value of the field.
Enter the IP address of the monitor station (this addres could be the same
as IP1 address)
.
IP ADDRESS 2
xxx.xxx.xxx.xxx
to quit menu or to give a Domain Name.
PARAMETERS
GPRS ?
to change menu.
Verify the presence of the SIM card (it should be as indicated in the preambule
inserted even before inserting the batteries). If this is not the case, then do so
before testing... The card is inserted into the modem slot, on the side of the
panel, chip above and the cut part goes into the modem. Insert it totally, so
that you can hear a "clic", then press the [YES] key of the keyboard. Press
the [YES] key to launch the GPRS level test.
Do not remove the SIM card
during the test.
IP ADDRESS 2
GPRS LEVEL
DOMAIN NAME 1
Enter the domain name of the monitor station. In case it doesn't
use any domain name, leave empty.
