Actions and commentaries
I N S T A L L A T I O N D A T A S H E E T - P R O G R A M M I N G
XTENDER Parameters
Display of the keypad
ENTRY COMPLETE !
SENDING ALARM
BY EMAIL ?
AREA
CONFIGURATION
AREA NAME 1 :
MODE :
SLOW
CANCEL
TEMPORIZATION
Wait
Chose the LENT mode + if the arming of the master system arms the
visio central. If arming of the cental is done by intrusion of the master system
and there are more than 15 cameras present on the site, then chose the
RAPID mode but the autonomy of the cameras will then be 2 years.
Wait
VALUE (0-255) :
(020) :
Value in second(s) of the entry tempo + . Frequently, the value of on
entry temporizationof the master system, or plus or minus according to the
configuraion of the site.
Enter the name of the area 1 +
, enter the SMS type. Do the same for
other areas. It is necessary to be as explicite as possible in the appointment
because the names of the areas and the device are transmitted to the
monitoring PC.
3
www.videofied.com
Wait
ARMING MODE
TRANSMISSION
DELAY
Wait
VALUE (0-600
(000) :
Value in second(s) of the entry tempo + . This value will allow to delay
the sending of the video, in order no to find the line busy, in the case the
XTENDER is plugged on the same analogic line as the master panel. If the
analogical line of the XTENDER is dedicated, put 0 value.
ARMING
CONFIRMATION
Wait
