1. Multi-Video
Following an intrusion, all the cameras in the site triggers on and
will each transmit their film to the monitor station PC. The first
film is automatically downloaded and the following are available
with the operator, who can watch the film on his control post by
a simple click.
This function is going to even better permit to remove any doubt
following an intrusion and also have more details on the burglers.
This function will also permit during a contact triggering to have
videos of the cameras which are involved.
2. Level of RSSI RF radio test displayed in
digits on the keypad
The measure of a good transmission and radio reception
between the devices and the panel is carried out flashing of the
device during the RF radio range test.
A regular flashing indicates a good reception range of the radio.
This function was improved upon by directly indicating on the
keypad the value of emission/reception of the radio of the device
tested.
This value, called RSSI, should not be inferior to 20.
Detail of new functionalities
:
1 - Multi-video
2 - Level of RSSI RF radio test displayed in digits on the keypad.
3 - Area 24/24
4 - Automatic rearming
5 - Management of contacts opened during arming
6 - Supply of the panel with 12V (panel without interphone only)
7 - Management of power cut sector (panel without interphone only)
www.videofied.com
I N S T A L L A T I O N D A T A S H E E T - P R O G R A M M I N G
New functionalities
Made by RSI VIDEO TECHNOLOGIES
1
Display of the keypad
Actions and commentaries
CAMERA 1
RECORDED
RADIO RANGE
TEST ?
2.1 During the installation (of a camera for example)
REQUEST IS SENT:
WAITING ANSWER
RF TEST
056
A regular flashing indicates sufficient radio range and displays the
value on the keypad. The latter must be at least equal to 20.
To stop the test and continue the installation.
