>
Possibility of testing RF cover (minimum radio level at 20).
>
Possibility of testing the detection cover range.
* This indicator will no longer flash from then on except at
opening, arming or during a detection test.
I N S T A L L A T I O N D A T A S H E E T
Outdoor MotionViewer
TM
DCV
Recording of the detector
The alarm panel must be put in "Recording device
mode", and the keypad must display“
PRESS
PROGRAM BUTTON OF DEVICE
”.
Insert the 3 Lithium batteries
LS14500
(in the same
directions).
Press the PROGRAM BUTTON of the camera
detector, release as soon as the indicator flashes.
Carefully place the block camera on its base
and screw down the 4 clamping screws.
Fix the base of the ball and socket head on a desired
height and place (while respecting fixing height.
Place the screw cover on top and screw down the
ball pivot.
If need be, use extentions then screw them down
to the camera detector on the top of the ball and
socket head (or extentions) and screw down
the ring of the ball and socket head in order
guarantee adequate fixing.
Finally, direct the camera as required and tighten
with wing screw or Allen screw (to be used instead of
the wing screw).
Test the RF range (RSSI level at 20 seconds).
Allocate an area (with direction arrows of the keypad)
and validate with the [YES] key.
Name the device.
Test the detection coverage area.
3
4
5
6
7
8
9
10
11
Location of the ball pivot,
camera fixing screw
Self protection
of the camera
Back wall
Camera block
Program Button
1
2
EMEA SALES
2, rue Alexis de Tocqueville
92160 ANTONY
FRANCE
Hot line : +33 (0)820 846 620 / UK : 0871 951
Fax : +33 (0)3 90 20 66 36
© 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIED
TM
is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
Specifications subject to change without notice.
North American Headquarter
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Hot line : 877-206-5800
Fax : 651-762-4693
www.videofied.com
DCV means DCV650 for USA/Canada, DCV750 for Australia/Singapore
and DCV250 for Europe and rest of the world.
