81
Folding instructions
10.5.3
Settings
•
If you are unable to close the folding hinge properly, do not
continue to ride your folding bicycle.
• Ask your specialist dealer to inspect the folding hinge.
10.6
Folding the folding bicycle
CauTion
Body parts can be caught or crushed between the moving
parts of the folding bicycle.
Risk of injury!
• When folding, only handle the folding bicycle away from
its hinges and joints.
• When folding the folding bicycle or pedals, proceed
slowly and with caution.
• Observe the moving parts when collapsing the folding
bicycle.
• Wear protective gloves.
noTiCe
Brake and gear cables can be bent or crushed between
the moving parts of the folding bicycle.
Risk of damage!
• Take care not to damage the brake and gear cables
when collapsing the folding bicycle.
1. Fold the kickstand up.
2. Adjust the pedal drive as follows:
– the left pedal crank should be at a 45° angle to the ground
towards the bottom (see Fig.
“Adjusting the pedal drive”
).
Fig. Adjusting the pedal drive
45°
3.
Fold the pedals in (see Chapter
“Pedals” on page 75)
.
4. Open the clamping lever on the saddle, set the saddle to the
lowest position, then close the clamping lever on the saddle.
