107
Other components
The saddle and seat post comprise a single unit; this is why
the load capacities must always be assessed together.
The load capacity depends on:
–
the material
–
the model
–
the construction type
–
the interior construction and
–
the condition of the bicycle
Suspension seat posts require a higher level of maintenance.
Suspension seat posts are subject to more wear and tear.
•
If the suspension seat post as delivered is too loose, adjust the
suspension fork (see
Fig. “Suspension seat post”
).
•
If the suspension seat post as delivered is too tight, have your
specialist dealer install a looser additional suspension fork.
1. Hold the saddle firmly and loosen the suspension seat post.
•
Unscrew the screw for the suspension seat post on the seat
post clamp anti-clockwise until the suspension seat post
can be shifted up or down, or
• open the quick-release by turning the quick-release lever
outwards.
2. Pull the suspension seat post out of the seat tube.
3. For a tighter suspension, rotate the suspension screw a
maximum of three rotations (clockwise) into the suspension
seat post.
4.
Insert the suspension seat post into the seat tube and adjust
the height.
5. Secure the seat post.
• Turn the screws on the seat post clamp clockwise until
the suspension seat post no longer moves and tighten the
screws, while still taking the torques into consideration, or
•
Close the quick-release by turning the quick-release lever
inwards.
• Adjust the quick-release if it does not close completely (see
Chapter
“Settings” on page 101
).
Fig.: Suspension seat post
1 Screw on the
seat post clamp
2 Quick-release
3 Tensioning screw
1
3
2
