Victoria Din en 82079-1 User Manual Download Page 101

Page: 101 / 121

101

Other components

12.8.2.1

opening the quick-release

•

Turn the quick-release outwards.

12.8.2.2

Closing the quick-release

•

Turn the quick-release inwards until it is flush against the seat
post and/or the front fork.
•

If the seat post or the quick-release axle are not secure,

adjust the quick-release.

12.8.3

Settings

1. Open the quick-release mechanism.
2. Screw in the adjusting screw or axle nut clockwise one quar-

ter of a turn
(see Fig.

“Adjusting the quick-release mechanism”

Close the quick-release and check the seat post / wheel is

securely tightened.

4. Repeat the process until the seat post / wheel is secure

when the quick-release / quick-release axle is closed.

If you can close the quick-release lever without using addi-

tional force, you should readjust the initial tension.
•

If you are not able to adjust the quick-release, ask your

specialist dealer to inspect it.

Fig.: Adjusting the quick-release

1 Axle nut
2 Adjustment screw

3 Quick-release lever

Summary of Contents for Din en 82079-1


























































































































Search results

Summary of Contents for Din en 82079-1

Reviews:

Related manuals for Din en 82079-1

Brands by name

Popular brands

Victoria Din en 82079-1, User Manual

Search results

Summary of Contents for Din en 82079-1

Reviews:

Related manuals for Din en 82079-1

Brands by name

Popular brands