Victoria Din en 82079-1 User Manual Download Page 18

Page: 18 / 121

Safety

3.6.2

Travelling with children in a children's
trailer

WaRninG

Increased acceleration and high speeds when riding

e-bikes (pedelecs).

Risk of accident and injury!

• Only ride at moderate speeds when riding with a child

trailer.

• Bear in mind the extended stopping distance caused by

the propulsive force of the child trailer.

•

Keep in mind that your bike is significantly longer with the
trailer system attached.

•

Transport a maximum of two children in the child trailer.

•

Only use trailers with functional lighting equipment that com-
plies with the regulations applicable in your respective country
or region.

•

For the child’s safety, choose a trailer with a restraint system.

•

Ensure that you equip the trailer with a luminescent-coloured
pennant flag on a flexible flagpole with a minimum height of
1.5 m and install covers for the wheel housings.

•

For maximum safety, select a model with a sturdy passenger

compartment and safety belts compliant with DIN EN 15918.

Summary of Contents for Din en 82079-1


























































































































Search results

Summary of Contents for Din en 82079-1

Reviews:

Related manuals for Din en 82079-1

Brands by name

Popular brands

Victoria Din en 82079-1, User Manual

Search results

Summary of Contents for Din en 82079-1

Reviews:

Related manuals for Din en 82079-1

Brands by name

Popular brands