background image

51

Lights

6.4.2.2 

attaching and removing the headlight

• 

To attach the headlight, 
push it from the front, 
inserting the mounting 
connection into the bracket 
until you hear and feel it 
click into place (see 

Fig. “Headlight”

).

•  Adjust the headlight 

(see Chapter 

“Settings” 

on page 49

).

• 

To remove it, push the lever down and pull the headlight out 
from the front.

6.4.2.3 

 Charging the battery

note:

  In  order  to  charge  the 

rear light and the headlight at 
the same time, you will require 

two USB charging devices or 

USB ports.

1. 

Insert  the  USB  plug  into 

the USB port of a charging 

device or computer.

2.  Open the cover of the 

micro USB socket (see 

Fig. “USB socket”

).

3. 

Insert the micro USB plug into the micro USB socket of the 

rear light and/or headlight.

Fig. Headlight (example)

1  Lever
2  Mounting connection

1

2

Fig. USB socket(example)

1  Button
2  Micro USB socket

1

2

The signal LED will shine red. The charging process will begin and 

takes up to 2 hours.

Once the signal LED shines blue, the charging process has fin-

ished.
4. 

Pull the micro USB plug out of the rear light and/or headlight.

5. 

Close the micro USB socket cover.

6. 

Pull the USB plug out of the USB port of the charging device 

or computer.

6.4.2.4 

Switching on and off

To switch on the lights:
• 

Press the button on the rear light and on the headlight (see 

Fig. “USB socket”

).

To switch the lights off:
• 

Press the button on the rear light and on the headlight again.

Summary of Contents for Din en 82079-1


























































































































Reviews: