Viconics VT8600 Series User Interface Manual Download Page 75

Page: 75 / 96

Viconics Technologies Inc.

www.viconics.com

[email protected]

Tel: (514) 321-5660

Fax: (514) 321-4150

028-0427-11

October 2018

- - : - -

Clock

Time format

AM-PM

Time

2014

Year

Month

Day

Weekday

Jan.

Sunday

Clock

The Clock settings screen allows the device’s internal time settings to be changed (current time, day, month, year and weekday
options), as well as to choose between a 12 hour AM / PM display or 24 hour display.

PARAMETER DETAILS

Configuration Parameters Default Value

Significance and Adjustments

Time Format

Default value:

AM-PM

Time Format

Current time display format. Choice between 12 hour (AM - PM) time format or 24
hour time format.

Note

: Changing the value of this parameter automatically changes the format of the

displayed value of the time parameter.

Choices

: AM-PM or 24 Hours

Time

Default value:

current time at power up

Time

Standard time display, 12 hour AM-PM or 24 hour format determined by the Time
Format parameter value.

Year

Default value:

2014

Year

Current year

Range

: 2000 - 2100

Month

Default value:

Jan.

Month

Current month

Range

: Jan. - Dec.

Day

Default value:

Date

Current date

Range

: 1 - 31

Weekday

Default value:

Monday

Read Only

Current Day

Automatically set based on data received from Year/Month parameters.

Range:

Monday - Sunday

Summary of Contents for VT8600 Series

































































































Search results

Summary of Contents for VT8600 Series

Reviews:

Related manuals for VT8600 Series

Brands by name

Popular brands

Viconics VT8600 Series, User Interface Manual

Search results

Summary of Contents for VT8600 Series

Reviews:

Related manuals for VT8600 Series

Brands by name

Popular brands