Viconics VT8600 Series, User Interface Manual

Page: 15 / 96

15
Viconics Technologies Inc. www.viconics.com | sales@viconics.com | Tel: (514) 321-5660 | Fax: (514) 321-4150
028-0427-11 October 2018
Automatic Heating/Cooling Mode
Setpoint Adjustment for Heating Mode
In automatic mode, setpoint showing at the top of the set point bar located directly under the blue line represents the actual oc-
cupied cooling setpoint.
During occupied setpoints adjustment, large digits are temporarily used to display the occupied Cooling
Setpoint or occupied Heating Setpoint. The actual setpoint is dependent on the last effective demand (heating or cooling). The
setpoint on top of the red line represents the actual occupied heating setpoint. The differential between the occupied heating and
cooling setpoint is defined by the minimum deadband configuration parameter.
Normal temperature display resumes after setpoints are adjusted and the actual occupied heating and cooling setpoints show in
the setpoint bar.
Other Functions
Local humidity only shows on models with the humidity sensor present and when enabled by configuration
property RH Display.
Outdoor temperature display is dependent on receiving a valid networked outdoor temperature value.